Environmental changes in biodiversity hotspot ecosystems ofSouth Ecuador: RESPonse and feedback effECTs (FOR2730)

Dataset ID:	497
Last updated:	2012-09-25
Dataset creators:	Ruetger Rollenbeck Thorsten Peters
Contact:	Thorsten Peters Ruetger Rollenbeck
Temporal coverage:	1998-03-19 17:00:00 - 2009-04-16 10:00:00
Geographic coverage:	ECSF climate station
Abstract:	Climate data ECSF climate station (1960 m) valida... Abstract: Climate data ECSF climate station (1960 m) validated and corrected. Validated data of the THIES climate station with quality attributes.
Additional info:	The values of this dataset are currently in revis... Additional info: The values of this dataset are currently in revision process and not available online. Please contact the dataset creators. Please refer to quality flags for data use
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	Climate Station ECS
Entity type:	dataTable
Attributes:	Air humidity 2m (Huma_2m) [Percent] precipitation (PCP) [Millimeter] Irradiation (Irradiation) [Watt per square meter] Emission of radiance (Emission) [Watt per square meter] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] air temperature in 2m (Ta_2m) [Degrees Celsius] Date and Time (datetime) (Unitless)

» back to overview

climate under canopy - Plot EC14 (T2)

view metadata
download
show on map

Dataset ID:	328
Last updated:	2012-09-05
Dataset creators:	Jürgen Homeier
Contact:	Jürgen Homeier
Temporal coverage:	2002-04-12 15:00:00 - 2003-04-09 15:00:00
Geographic coverage:	Plot EC14 (T2)
Abstract:	automatic temperature and humidity measurements u... Abstract: automatic temperature and humidity measurements under canopy; 2m above ground; measured half-hourly with HOBO
Additional info:	--- Additional info:
Keywords:	\| climate under canopy \| air temperature \| relative humidity \| temperature \| humidity \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	temperature and humidity measurements under canopy
Entity type:	dataTable
Attributes:	air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at El Bosque

view metadata
download
show on map

Dataset ID:	355
Last updated:	2010-12-01
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2002-08-01 01:00:00 - 2008-02-15 15:00:00
Geographic coverage:	El Bosque
Abstract:	Climate data measured by automatic Thies weather ... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	--- Additional info:
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	Climate Station BOS
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

climate under canopy - Plot EC10 (Q2)

view metadata
download
show on map

Dataset ID:	326
Last updated:	2012-09-05
Dataset creators:	Jürgen Homeier
Contact:	Jürgen Homeier
Temporal coverage:	2002-04-11 14:30:00 - 2003-04-09 16:00:00
Geographic coverage:	Plot EC10 (Q2)
Abstract:	automatic temperature and humidity measurements u... Abstract: automatic temperature and humidity measurements under canopy; 2m above ground; measured half-hourly with HOBO
Additional info:	--- Additional info:
Keywords:	\| climate under canopy \| air temperature \| relative humidity \| temperature \| humidity \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	temperature and humidity measurements under canopy
Entity type:	dataTable
Attributes:	air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data Pasto Abraham

view metadata
download
show on map

Dataset ID:	970
Last updated:	2012-09-28
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-10-24 13:00:00 - 2012-08-15 10:00:00
Geographic coverage:	Climate Station Pasto Abraham
Abstract:	Cliamate Data Meassurements Pasto Abraham... Abstract: Cliamate Data Meassurements Pasto Abraham
Additional info:	The data are quality checked by a standardised me... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Pasto Abraham Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Air temperature in 2m max = 30 Air temperature in 2m min = 10 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| relative humidity \| precipitation \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	Climate Station Abraham
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) precipitation (PCP) [Millimeter] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent]

» back to overview

El Tiro climate station quality controlled

view metadata
download

Dataset ID:	1401
Last updated:	2015-06-09
Dataset creators:	Ruetger Rollenbeck Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters Ruetger Rollenbeck
Temporal coverage:	1998-02-12 15:00:00 - 2015-01-18 15:00:00
Geographic coverage:	El Tiro - Climate station
Abstract:	Quality controls applied to the hourly time serie... Abstract: Quality controls applied to the hourly time series of the El-Tiro-climate stations. Temeprature and wind direction had to be adjusted for apparent deviations. for details review the file qualityassessment.pdf supplied with the ECSF best estimate data set
Additional info:	--- Additional info:
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| wind direction \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

1. Entity:

view/filter values

Entity name:	Climate data El Tiro
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] Irradiation (Irradiation) [Watt per square meter] Emission of radiance (Emission) [Watt per square meter]

» back to overview

Climate Station Data at Tapichalaca

view metadata
download
show on map

Dataset ID:	335
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2003-08-19 19:00:00 - 2007-06-18 11:00:00
Geographic coverage:	Tapichalaca
Abstract:	Climate data measured by automatic Thies weather ... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised me... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Tapichalaca Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| relative humidity \| wind speed \| precipitation \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	Climate Station TAP
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data ECSF established 2010

view metadata
download
show on map

Dataset ID:	1202
Last updated:	2012-09-25
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2010-06-21 19:00:00 - 2012-08-14 15:00:00
Geographic coverage:	ECSF climate station
Abstract:	Due to technical problems the former weather stat... Abstract: Due to technical problems the former weather station ECSF (established 1998) was shut down in 2010. At the same time a new weather station called "Climate Station ECSF established 2010" was installed 3m beside the former ECSF weather station on the same measuring plot.
Additional info:	The data are quality checked by a standardised me... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site ECSF Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 25 Global Radiation max = 1400 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 99.9 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| wind direction \| long term monitoring \| TMean \| ECSF \| data logger \| automatic weather station \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	ECSF established 2010
Entity type:	dataTable
Attributes:	Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Irradiation (Irradiation) [Watt per square meter] precipitation (PCP) [Millimeter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Paramo

view metadata
download
show on map

Dataset ID:	334
Last updated:	2012-02-22
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-01-01 01:00:00 - 2011-02-27 10:00:00
Geographic coverage:	Cajanuma Paramo
Abstract:	Climate data measured by automatic Thies weather ... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised me... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Cajanuma Páramo Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 26 Global Radiation max = 1400 Soil temperature in 0cm depth max = 35 Soil temperature in 0cm depth min = 0 Soil temperature in 10cm depth max = 23 Soil temperature in 10cm depth min = 3 Soil temperature in 60cm depth max = 15 Soil temperature in 60cm depth min = 5 Air temperature in 2m max = 20 Air temperature in 2m min = 0 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	Climate Station PAR
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

climate under canopy - Plot EC06 (T1)

view metadata
download
show on map

Dataset ID:	324
Last updated:	2012-09-05
Dataset creators:	Jürgen Homeier
Contact:	Jürgen Homeier
Temporal coverage:	2002-04-11 12:30:00 - 2003-04-10 16:00:00
Geographic coverage:	Plot EC06 (T1)
Abstract:	automatic temperature and humidity measurements u... Abstract: automatic temperature and humidity measurements under canopy; 2m above ground; measured half-hourly
Additional info:	--- Additional info:
Keywords:	\| climate under canopy \| air temperature \| relative humidity \| temperature \| humidity \|
Intellectual rights:	FOR816 data user agreement

1. Entity:

view/filter values

Entity name:	temperature and humidity measurements under canopy
Entity type:	dataTable
Attributes:	air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Date and Time (datetime) (Unitless)

» back to overview

Environmental changes in biodiversity hotspot ecosystems of
South Ecuador: RESPonse and feedback effECTs (FOR2730)

Platform data

Overview

Detailed view

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Download

Please accept the following data user agreement for external data users:

Data Services

Quick search

Keywords

Latest datasets

Latest publications

Environmental changes in biodiversity hotspot ecosystems of South Ecuador: RESPonse and feedback effECTs (FOR2730)

Platform data

Overview

Detailed view

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Download

Please accept the following data user agreement for external data users:

Data Services

Quick search

Keywords

Latest datasets

Latest publications

Environmental changes in biodiversity hotspot ecosystems of
South Ecuador: RESPonse and feedback effECTs (FOR2730)