Dataset ID:	334
Last updated:	2012-02-22
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-01-01 01:00:00 - 2011-02-27 10:00:00 - time zone: 0
Geographic coverage:	Cajanuma Paramo
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Cajanuma Páramo Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 26 Global Radiation max = 1400 Soil temperature in 0cm depth max = 35 Soil temperature in 0cm depth min = 0 Soil temperature in 10cm depth max = 23 Soil temperature in 10cm depth min = 3 Soil temperature in 60cm depth max = 15 Soil temperature in 60cm depth min = 5 Air temperature in 2m max = 20 Air temperature in 2m min = 0 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station PAR
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at El Tiro

Dataset ID:	338
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-02-12 15:00:00 - 2011-02-27 14:00:00 - time zone: 0
Geographic coverage:	El Tiro - Climate station
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	Attention: The old weatherstation was replaced by ... Additional info: Attention: The old weatherstation was replaced by a new one on 9.6.2010 The data are quality checked by a standardised method. Climate Parameter Quality Check for site El Tiro Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 25 Rad Max = 1350 tsoil0cm max = 30 tsoil0cm min = 2 tsoil10cm max = 20 tsoil10cm min = 9 Tsoil60cm max = 15 tsoil60ccm min = 7 Air temperature in 2m max = 25 Air temperature in 2m min = 3 Air humidity max = 100 Air humidity min = 10 3. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| wind speed \| precipitation \| temperature \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station TIR
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Tapichalaca

Dataset ID:	335
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2003-08-19 19:00:00 - 2007-06-18 11:00:00 - time zone: 0
Geographic coverage:	Tapichalaca
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Tapichalaca Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| relative humidity \| wind speed \| precipitation \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station TAP
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data ECSF established 2010

Dataset ID:	1202
Last updated:	2012-09-25
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2010-06-21 19:00:00 - 2012-08-14 15:00:00 - time zone: -5
Geographic coverage:	ECSF climate station
Abstract:	Due to technical problems the former weather stati... Abstract: Due to technical problems the former weather station ECSF (established 1998) was shut down in 2010. At the same time a new weather station called "Climate Station ECSF established 2010" was installed 3m beside the former ECSF weather station on the same measuring plot.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site ECSF Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 25 Global Radiation max = 1400 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 99.9 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| wind direction \| long term monitoring \| TMean \| ECSF \| data logger \| automatic weather station \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	ECSF established 2010
Entity type:	dataTable
Attributes:	Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Irradiation (Irradiation) [Watt per square meter] precipitation (PCP) [Millimeter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Cajanuma Refugio

Dataset ID:	914
Last updated:	2011-04-06
Dataset creators:	Paul Emck Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1997-12-09 12:00:00 - 2000-11-24 08:00:00 - time zone: 0
Geographic coverage:	Cajanuma Refugio Climate Station
Abstract:	Climate data measuered by automatic Thies weather ... Abstract: Climate data measuered by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Cajanuma Refugio Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 30 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 2 Soil temperature in 10cm depth max = 20 Soil temperature in 10cm depth min = 2 Soil temperature in 60cm depth max = 20 Soil temperature in 60cm depth min = 2 Air temperature in 2m max = 30 Air temperature in 2m min = 0 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station CAJ
Entity type:	dataTable
Attributes:	air temperature in 2m (Ta_2m) [Degrees Celsius] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] Global radiation (2m) (gRad1) [Watt per square meter] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data Antenas Ridge

Dataset ID:	329
Last updated:	2013-02-27
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-04-02 12:00:00 - 2007-02-10 08:00:00 - time zone: 0
Geographic coverage:	Antenas ridge climate station
Abstract:	Climate data measuered by automatic Thies weather ... Abstract: Climate data measuered by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Antenas_ridge Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 30 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 3 Soil temperature in 10cm depth max = 24 Soil temperature in 10cm depth min = 4 Soil temperature in 60cm depth max = 15 Soil temperature in 60cm depth min = 5 Air temperature in 2m max = 22 Air temperature in 2m min = 3 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station ANT
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data Reserva Laipuna mountain peak

Dataset ID:	963
Last updated:	2012-09-27
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-04-16 15:00:00 - 2012-08-24 11:00:00 - time zone: -5
Geographic coverage:	Climate Station Laipuna Top / Mountain
Abstract:	--- Abstract:
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Laipuna Top Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Air temperature in 2m max = 35 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

Entity name:	Climat Station Laipuna Mountain Peak
Entity type:	dataTable
Attributes:	Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Bombuscaro

Dataset ID:	501
Last updated:	2012-09-28
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-04-10 17:00:00 - 2012-03-24 10:00:00 - time zone: 0
Geographic coverage:	Bombuscaro
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Bombuscaro Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Globar Radiation max Down = 250 Soil temperature in 10cm depth max = 40 Soil temperature in 10cm depth min = 15 Soil temperature in 60cm depth max = 25 Soil temperature in 60cm depth min = 15 Air temperature in 2m max = 35 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| photosynthetic active radiation \| global radiation \| wind speed \| land temperature \| land humidity \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station BOM
Entity type:	dataTable
Attributes:	Global radiation (down) (gRaddown) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

ECSF Climate station best estimate Ver. 2

Dataset ID:	1415
Last updated:	2015-11-26
Dataset creators:	Ruetger Rollenbeck Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters Ruetger Rollenbeck
Temporal coverage:	1998-03-19 17:00:00 - 2015-10-01 01:00:00 - time zone: -5
Geographic coverage:	ECSF climate station
Abstract:	Quality assessment ECSF climate station hourly dat... Abstract: Quality assessment ECSF climate station hourly data: Version 2; Dataset supersedes ver. 1 which is left for reference. Please be aware, that aggregated values may be wrong, due to the data gaps. This is especcially critical for precipitation. Variables: Ta2m =Air Temperature at 2 m (T) PCP = Precipitation at 1 m (P) Huma_2m = relative humidity at 2m (rH) Irradiation = global radiation at 2 m (gRad), widspeed. Emitted radiation, wind direction and soil-temperatures are not yet published For each variable, a measure of uncertainty is given in the original dimension. This value can be considered as the potential deviation from real conditions. Where no parallel measurements exist, the uncertainty is given as the standard deviation of that difference. By Rütger Rollenbeck, 25.11.2015, rollenbeck@lcrs.de
Additional info:	Details of data processing are given in the attach... Additional info: Details of data processing are given in the attached Qualityassessment-Document
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| times series \| ECSF \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	ECSF climate data Best estimate ver. 2
Entity info:	This dataset supersedes the best estimate ver.1 and is updated until the end of September 2015
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] potential uncertainty of Ta_2m (Ta_2m_uncertainty) [Degrees Celsius] precipitation (PCP) [Millimeter] potential uncertainty of PCP (PCP_Uncertainty) [Millimeter per hour] Air humidity 2m (Huma_2m) [Percent] potential uncertainty of relative air humidity (Huma_2m_Uncertainty) [Percent] Irradiation (Irradiation) [Watt per square meter] potential uncertainty of global radiation (Irradiation_Uncertainty) [Watt per square meter] Wind speed (Windspeed) [Meter per second]

Entity name:	qualityassessmen_ver2t
Entity info:	please read this file, before employing data analysis. Please contact data creators before publishing data
Entity type:	otherEntity

» back to overview

Climate Station Data at Vilcabamba

Dataset ID:	340
Last updated:	2011-01-25
Dataset creators:	Paul Emck Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-02-19 01:00:00 - 2003-03-25 16:00:00 - time zone: 0
Geographic coverage:	Vilcabamba
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Vilcabamba Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 5 Soil temperature in 10cm depth max = 35 Soil temperature in 10cm depth min = 10 Soil temperature in 60cm depth max = 25 Soil temperature in 60cm depth min = 10 Air temperature in 2m max = 35 Air temperature in 2m min = 10 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station VIL
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data Antenas Top

Dataset ID:	969
Last updated:	2012-09-28
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2010-05-29 17:00:00 - 2012-08-16 13:00:00 - time zone: -5
Geographic coverage:	Climate Station Antenas Top
Abstract:	Climate Station installed on 29.05.2010 Attenti... Abstract: Climate Station installed on 29.05.2010 Attention! Cooordinates and altitude determined by DGM, field validation is missing!
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Antenas Top Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 30 Global Radiation max = 1400 Soil temperature in 10cm depth max = 16 Soil temperature in 10cm depth min = 5 Soil temperature in 60cm depth max = 12 Soil temperature in 60cm depth min = 4 Air temperature in 2m max = 22 Air temperature in 2m min = 1 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station Ant Top
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] Global radiation (2m) (gRad1) [Watt per square meter] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] Soil Temperature at 50 cm (temp_soil_50cm) [Degrees Celsius]

» back to overview

Climate Station Data at Cajanuma Forest

Dataset ID:	330
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2003-03-29 13:00:00 - 2007-04-24 10:00:00 - time zone: 0
Geographic coverage:	Cajanuma Wald
Abstract:	Climate data measuered by automatic Thies weather ... Abstract: Climate data measuered by automatic Thies weather station of the working group B2. Windspeed and winddirection were measured 1m above and 1m below forest canopy.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for Cajanuma Forest Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed 8m max = 15 windspeed 2m max = 4 Rad Max = 500 graddown max = 50 Air temperature in 2m max = 20 Air temperature in 2m min = 0 Air temperature in 30cm max = 20 Air temperature in 30cm min = 0 Air humidity in 2m max = 100 Air humidity in 2m min = 10 Air humidity in 30cm max = 100 Air humidity in 30cm min = 10 3. Wind direction and soil moistures are not quality checked and flag is set to "nqc = not quality checked" 4. Soil moisture is not quality checked All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station WAL
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] air temperature in 30cm (Ta_30cm) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Air humidity 30cm (Huma_30cm) [Percent] Global radiation (gRad2) [Watt per square meter] Global radiation (down) (gRaddown) [Watt per square meter] wind speed 8m (Windspeed_8m) [Meter per second] Wind direction 8m (Wind_direction_8m) [Degree] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] Soil moisture 10cm Forest vegetation (Soil_moisture_10cm_forest) [Volume percent] Soil moisture 50cm Forest vegetation (Soil_moisture_50cm_forest) [Volume percent] Soil moisture 10cm Bamboo vegetation (Soil_moisture_10cm_bamboo) [Volume percent]

» back to overview

automatic specific humidty of air, deficit of specific humidity, vapour pressure deficit, photosynthetic active radiation, windspeed, global radiation and radiation balance measurements

Dataset ID:	500
Last updated:	2010-12-21
Dataset creators:	Manfred Küppers
Contact:	Manfred Küppers
Temporal coverage:	2000-09-01 00:05:00 - 2002-02-11 16:10:00 - time zone: -5
Geographic coverage:	Q2.2
Abstract:	--- Abstract:
Additional info:	Comment by the Data Manager: further Information ... Additional info: Comment by the Data Manager: further Information to the Setup of the Measurement of this Data can be found in the following Article Motzer, T.; Munz, N.; Küppers, M.; Schmitt, D. & Anhuf, D. (2005): Stomatal conductance, transpiration and sap flow of tropical montane rain forest trees in the southern Ecuadorian Andes. Tree Physiology 25, 1283-1293 DOI: http://dx.doi.org/10.1093/treephys/25.10.1283.
Keywords:	\| photosynthetic active radiation \| global radiation \| wind speed \| specific humidity of air \| deficit of specific humidity \| vapour pressure deficit \| radiation balance \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	automatic measurements
Entity type:	dataTable
Attributes:	specific humidty of air 4m (q_4m) [Gram per kilogram] specific humidty of air 8m (q_8m) [Gram per kilogram] specific humidty of air 13m (q_13m) [Gram per kilogram] specific humidty of air 20m (q_20m) [Gram per kilogram] deficit of specific humidity 4m (d_4m) [Gram per kilogram] deficit of specific humidity 8m (d_8m) [Gram per kilogram] deficit of specific humidity 13m (d_13m) [Gram per kilogram] deficit of specific humidity 20m (d_20m) [Gram per kilogram] vapour pressure deficit 4m (vpd_4m) [Hectopascal] vapour pressure deficit 8m (vpd_8m) [Hectopascal] vapour pressure deficit 13m (vpd_13m) [Hectopascal] vapour pressure deficit 20m (vpd_20m) [Hectopascal] photosynthetic active radiation 4m (PAR_4m) [Photon per square meter per second] photosynthetic active radiation 8m (PAR_8m) [Photon per square meter per second] photosynthetic active radiation 13m (PAR_13m) [Photon per square meter per second] photosynthetic active radiation 20m (PAR_20m) [Photon per square meter per second] wind speed 8m (Windspeed_8m) [Meter per second] wind speed 13m (Windspeed_13m) [Meter per second] wind speed 20m (Windspeed_20m) [Meter per second] Global radiation (20m) (G) [Watt per square meter] radiation balance 20m (Q) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at TS1

Dataset ID:	339
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1999-05-16 10:00:00 - 2011-02-20 12:00:00 - time zone: 0
Geographic coverage:	TS 1
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site TS1 Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 15 Rad Max = 1300 tsoil0cm max = 30 tsoil0cm min = 6 tsoil10cm max = 23 tsoil10cm min = 7 Tsoil60cm max = 17 tsoil60ccm min = 10 Air temperature in 2m max = 26 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station TS1
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

automatic air temperature and relative humiditiy measurements

Dataset ID:	354
Last updated:	2008-11-27
Dataset creators:	Manfred Küppers
Contact:	Manfred Küppers
Temporal coverage:	2000-09-01 00:05:00 - 2002-02-11 16:10:00 - time zone: -5
Geographic coverage:	Q2.2
Abstract:	automatic air temperature, relative humiditiy, soi... Abstract: automatic air temperature, relative humiditiy, soil moisture, suction power potential, ohotosyntetic active radiation, global radiation and wind speed measurements; measaured in 5 minute intervall
Additional info:	--- Additional info:
Keywords:	\| air temperature \| relative humidity \| photosynthetic active radiation \| global radiation \| wind speed \| suction power potential \| temperature \| humidity \| soil moisture \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	air temperature and relative humiditiy measurements
Entity type:	dataTable
Attributes:	Air temperature in 4 m (Ta_4m) [Degrees Celsius] Air temperature in 8m (Ta_8m) [Degrees Celsius] Air temperature in 13 m (Ta_13m) [Degrees Celsius] Air temperature in 20 m (Ta_20m) [Degrees Celsius] Air humidity 4m (Huma_4m) [Percent] Air humidity 8m (Huma_8m) [Percent] Air humidity 13m (Huma_13m) [Percent] Air humidity 20m (Huma_20m) [Percent] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at ECSF Gegenhang

Dataset ID:	502
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2005-09-30 17:00:00 - 2011-02-23 12:00:00 - time zone: 0
Geographic coverage:	Climate Station Gegenhang
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site ECSF Gegenhang Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 25 Global Radiation max = 1600 Global Radiation max down = 250 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| land temperature \| land humidity \| precipitation \| temperature \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

Entity name:	Climate Station GEG
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] Global radiation (down) (gRaddown) [Watt per square meter] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Cajanuma Horst

Dataset ID:	503
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2003-03-28 17:00:00 - 2007-04-24 13:00:00 - time zone: 0
Geographic coverage:	Cajanuma Horst
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Cajanuma Horst Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 20 Global Radiation max = 1300 Air temperature in 2m max = 20 Air temperature in 2m min = 2 Air temperature in 30cm max = 25 Air temperature in 30cm min = 0 Air humidity in 2m max = 100 Air humidity in 2m min = 10 Air humidity in 30cm max = 100 Air humidity in 30cm min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 20 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction and soil moisture is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| relative humidity \| global radiation \| wind speed \| land temperature \| land humidity \| precipitation \| temperature \| humidity \| wind direction \| albedo \| soil moisture \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station CAH
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] air temperature in 30cm (Ta_30cm) [Degrees Celsius] air temperature in 2m (Ta_2m) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless) Air humidity 2m (Huma_2m) [Percent] Air humidity 30cm (Huma_30cm) [Percent] Soil moisture 10cm Paramo vegetation (Soil_moisture_10cm_paramo) [Volume percent] Soil moisture 10cm (Soil_moisture_10cm) [Volume percent] Soil moisture 50cm (Soil_moisture_50cm) [Volume percent] Global radiation (down) (gRaddown) [Watt per square meter]

» back to overview

Climate Station Data Reserva Laipuna Valley

Dataset ID:	964
Last updated:	2012-09-27
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-04-16 15:00:00 - 2012-08-24 13:00:00 - time zone: -5
Geographic coverage:	Climate Station Laipuna Valley
Abstract:	--- Abstract:
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Laipuna Valley Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Air temperature in 2m max = 40 Air temperature in 2m min = 10 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

Entity name:	Climate Station Laipuna Valley
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] Global radiation (2m) (gRad1) [Watt per square meter] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree]

» back to overview

Climate Station Data at El Libano

Dataset ID:	332
Last updated:	2011-04-06
Dataset creators:	Paul Emck Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-01-01 01:00:00 - 2003-03-30 11:00:00 - time zone: 0
Geographic coverage:	El Libano
Abstract:	Climate data measuered by automatic Thies weather ... Abstract: Climate data measuered by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site El Libano Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 5 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 5 Soil temperature in 10cm depth max = 25 Soil temperature in 10cm depth min = 10 Soil temperature in 60cm depth max = 25 Soil temperature in 60cm depth min = 10 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station LIB
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Motilon

Dataset ID:	333
Last updated:	2011-01-25
Dataset creators:	Paul Emck Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2001-08-14 01:00:00 - 2003-03-20 11:00:00 - time zone: 0
Geographic coverage:	Climate Station Motilon
Abstract:	Climate data measuered by automatic Thies weather ... Abstract: Climate data measuered by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Motilon Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 5 Soil temperature in 10cm depth max = 30 Soil temperature in 10cm depth min = 10 Soil temperature in 60cm depth max = 20 Soil temperature in 60cm depth min = 10 Air temperature in 2m max = 35 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station MOT
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Environmental changes in biodiversity hotspot ecosystems of South Ecuador: RESPonse and feedback effECTs (FOR2730)

Platform data

Overview

Detailed view

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Download

Please accept the following data user agreement for external data users:

Data Services

Quick search

Keywords:

Latest datasets

Latest publications

Environmental changes in biodiversity hotspot ecosystems of
South Ecuador: RESPonse and feedback effECTs (FOR2730)