Dataset ID:	333
Last updated:	2011-01-25
Dataset creators:	Paul Emck Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2001-08-14 01:00:00 - 2003-03-20 11:00:00 - time zone: 0
Geographic coverage:	Climate Station Motilon
Abstract:	Climate data measuered by automatic Thies weather ... Abstract: Climate data measuered by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Motilon Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 5 Soil temperature in 10cm depth max = 30 Soil temperature in 10cm depth min = 10 Soil temperature in 60cm depth max = 20 Soil temperature in 60cm depth min = 10 Air temperature in 2m max = 35 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station MOT
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at El Bosque

Dataset ID:	355
Last updated:	2010-12-01
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2002-08-01 01:00:00 - 2008-02-15 15:00:00 - time zone: -5
Geographic coverage:	El Bosque
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	--- Additional info:
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station BOS
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at El Tiro

Dataset ID:	338
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-02-12 15:00:00 - 2011-02-27 14:00:00 - time zone: 0
Geographic coverage:	El Tiro - Climate station
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	Attention: The old weatherstation was replaced by ... Additional info: Attention: The old weatherstation was replaced by a new one on 9.6.2010 The data are quality checked by a standardised method. Climate Parameter Quality Check for site El Tiro Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 25 Rad Max = 1350 tsoil0cm max = 30 tsoil0cm min = 2 tsoil10cm max = 20 tsoil10cm min = 9 Tsoil60cm max = 15 tsoil60ccm min = 7 Air temperature in 2m max = 25 Air temperature in 2m min = 3 Air humidity max = 100 Air humidity min = 10 3. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| wind speed \| precipitation \| temperature \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station TIR
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

ECSF Climate station best estimate Ver. 2

Dataset ID:	1415
Last updated:	2015-11-26
Dataset creators:	Ruetger Rollenbeck Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters Ruetger Rollenbeck
Temporal coverage:	1998-03-19 17:00:00 - 2015-10-01 01:00:00 - time zone: -5
Geographic coverage:	ECSF climate station
Abstract:	Quality assessment ECSF climate station hourly dat... Abstract: Quality assessment ECSF climate station hourly data: Version 2; Dataset supersedes ver. 1 which is left for reference. Please be aware, that aggregated values may be wrong, due to the data gaps. This is especcially critical for precipitation. Variables: Ta2m =Air Temperature at 2 m (T) PCP = Precipitation at 1 m (P) Huma_2m = relative humidity at 2m (rH) Irradiation = global radiation at 2 m (gRad), widspeed. Emitted radiation, wind direction and soil-temperatures are not yet published For each variable, a measure of uncertainty is given in the original dimension. This value can be considered as the potential deviation from real conditions. Where no parallel measurements exist, the uncertainty is given as the standard deviation of that difference. By Rütger Rollenbeck, 25.11.2015, rollenbeck@lcrs.de
Additional info:	Details of data processing are given in the attach... Additional info: Details of data processing are given in the attached Qualityassessment-Document
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| times series \| ECSF \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	ECSF climate data Best estimate ver. 2
Entity info:	This dataset supersedes the best estimate ver.1 and is updated until the end of September 2015
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] potential uncertainty of Ta_2m (Ta_2m_uncertainty) [Degrees Celsius] precipitation (PCP) [Millimeter] potential uncertainty of PCP (PCP_Uncertainty) [Millimeter per hour] Air humidity 2m (Huma_2m) [Percent] potential uncertainty of relative air humidity (Huma_2m_Uncertainty) [Percent] Irradiation (Irradiation) [Watt per square meter] potential uncertainty of global radiation (Irradiation_Uncertainty) [Watt per square meter] Wind speed (Windspeed) [Meter per second]

Entity name:	qualityassessmen_ver2t
Entity info:	please read this file, before employing data analysis. Please contact data creators before publishing data
Entity type:	otherEntity

» back to overview

manual measurement of fog and precipitation

Dataset ID:	346
Last updated:	2010-11-29
Dataset creators:	Ruetger Rollenbeck
Contact:	Ruetger Rollenbeck
Temporal coverage:	2002-07-31 00:00:00 - 2008-02-29 00:00:00 - time zone: -5
Geographic coverage:	river crossing ZigZag Path - Rio San Francisco
Abstract:	manual measurement of fog & precipitation; (1 m²-m... Abstract: manual measurement of fog & precipitation; (1 m²-mesh-collector at 1 m above ground)
Additional info:	--- Additional info:
Keywords:	\| precipitation \| fog precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	fog & precipitation
Entity type:	dataTable
Attributes:	precipitation 1m (LLP) [Unitless] Fog precipitation (NP) [Unitless] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data Antenas Top

Dataset ID:	969
Last updated:	2012-09-28
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2010-05-29 17:00:00 - 2012-08-16 13:00:00 - time zone: -5
Geographic coverage:	Climate Station Antenas Top
Abstract:	Climate Station installed on 29.05.2010 Attenti... Abstract: Climate Station installed on 29.05.2010 Attention! Cooordinates and altitude determined by DGM, field validation is missing!
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Antenas Top Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 30 Global Radiation max = 1400 Soil temperature in 10cm depth max = 16 Soil temperature in 10cm depth min = 5 Soil temperature in 60cm depth max = 12 Soil temperature in 60cm depth min = 4 Air temperature in 2m max = 22 Air temperature in 2m min = 1 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station Ant Top
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] Global radiation (2m) (gRad1) [Watt per square meter] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] Soil Temperature at 50 cm (temp_soil_50cm) [Degrees Celsius]

» back to overview

Weekly element concentrations in precipitation at the FN2 site (ECSF area, Camino Canal / Zig-Zag) between 1998-2013

Dataset ID:	1674
Last updated:	2017-09-27
Dataset creators:	Andre Velescu Wolfgang Wilcke
Contact:	Wolfgang Wilcke Andre Velescu
Temporal coverage:	1998-03-20 00:00:00 - 2013-05-01 00:00:00 - time zone: -5
Geographic coverage:	FN2 rainfall station Camino Canal / Zig-Zag
Abstract:	Weekly time series of measured concentrations of A... Abstract: Weekly time series of measured concentrations of Al, Mn, Zn, Cl, PO4-P, Total P, NH4-N, NO3-N, Total N, K, Na, Mg, Ca and Total organic C in precipitation in the ECSF area at the FN2 site (Camino Canal / Zig-Zag). The weekly time series extends between April 1998 and May 2013. Precipitation was sampled with 5 Hellmann-type collectors. Replicates were collected, volume-weighted and bulked to one sample per plot. Samples were immediately filtered (4-7 µm) in the laboratory of the ECSF and stored at -20 °C until transport in frozen state to Germany or to Switzerland for concentration measurements.
Additional info:	--- Additional info:
Keywords:	\| precipitation \| nitrate \| ammonium \| chloride \| calcium \| potassium \| magnesium \| sodium \| aluminium \| manganese \| zinc \| element concentrations \| total nitrogen \| phosphate \| total phosphorus \| total organic carbon \| time series \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	fn2_precipitation_chemistry_v1
Entity info:	Weekly precipitation chemistry FN2 1998-2013
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) Aluminium measured in precipitation (Alw_pcp) [Milligram per liter] Manganese measured in precipitation (Mnw_pcp) [Milligram per liter] Zinc measured in precipitation (Znw_pcp) [Milligram per liter] Calcium measured in precipitation (Caw_pcp) [Milligram per liter] Potassium measured in precipitation (Kw_pcp) [Milligram per liter] Magnesium measured in precipitation (Mgw_pcp) [Milligram per liter] Sodium measured in precipitation (Naw_pcp) [Milligram per liter] Ammonium measured in precipitation (NH4w_pcp) [Milligram of nitrogen per liter] Nitrate measured in precipitation (NO3w_pcp) [Milligram of nitrogen per liter] Total nitrogen measured in precipitation (Ntotw_pcp) [Milligram of nitrogen per liter] Total sulphur measured in precipitation (Stotw_pcp) [Milligram per liter] Chloride measured in precipitation (Clw_pcp) [Milligram per liter] Dissolved organic carbon measured in precipitation (DOCw_pcp) [Milligram per liter] Ortho-phosphate (reactive phosphorus) measured in precipitation (PO4w_pcp) [Milligram of phosphorus per liter] Total phosphorus measured in precipitation (Ptotw_pcp) [Milligram of phosphorus per liter]

» back to overview

Weekly element concentrations in precipitation at the FN3 site (T2 / ECSF climate station) between 2000-2013

Dataset ID:	1676
Last updated:	2017-09-27
Dataset creators:	Andre Velescu Wolfgang Wilcke
Contact:	Wolfgang Wilcke Andre Velescu
Temporal coverage:	2000-05-10 00:00:00 - 2013-05-01 00:00:00 - time zone: -5
Geographic coverage:	ECSF climate station
Abstract:	Weekly time series of measured concentrations of A... Abstract: Weekly time series of measured concentrations of Al, Mn, Zn, Cl, PO4-P, Total P, NH4-N, NO3-N, Total N, K, Na, Mg, Ca and Total organic C in precipitation in the ECSF area at the FN3 site on T2 near the ECSF meteorological station. The weekly time series extends between May 2000 and May 2013. Precipitation was sampled with 5 Hellmann-type collectors. Replicates were collected, volume-weighted and bulked to one sample per plot. Samples were immediately filtered (4-7 µm) in the laboratory of the ECSF and stored at -20 °C until transport in frozen state to Germany or to Switzerland for concentration measurements.
Additional info:	--- Additional info:
Keywords:	\| precipitation \| ECSF \| nitrate \| ammonium \| chloride \| aluminium \| manganese \| zinc \| element concentrations \| total nitrogen \| phosphate \| total phosphorus \| total organic carbon \| time series \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	fn3_precipitation_chemistry_v1
Entity info:	Weekly precipitation chemistry FN3 2000-2013
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) Aluminium measured in precipitation (Alw_pcp) [Milligram per liter] Manganese measured in precipitation (Mnw_pcp) [Milligram per liter] Zinc measured in precipitation (Znw_pcp) [Milligram per liter] Calcium measured in precipitation (Caw_pcp) [Milligram per liter] Potassium measured in precipitation (Kw_pcp) [Milligram per liter] Magnesium measured in precipitation (Mgw_pcp) [Milligram per liter] Sodium measured in precipitation (Naw_pcp) [Milligram per liter] Ammonium measured in precipitation (NH4w_pcp) [Milligram of nitrogen per liter] Nitrate measured in precipitation (NO3w_pcp) [Milligram of nitrogen per liter] Total nitrogen measured in precipitation (Ntotw_pcp) [Milligram of nitrogen per liter] Total sulphur measured in precipitation (Stotw_pcp) [Milligram per liter] Chloride measured in precipitation (Clw_pcp) [Milligram per liter] Dissolved organic carbon measured in precipitation (DOCw_pcp) [Milligram per liter] Ortho-phosphate (reactive phosphorus) measured in precipitation (PO4w_pcp) [Milligram of phosphorus per liter] Total phosphorus measured in precipitation (Ptotw_pcp) [Milligram of phosphorus per liter]

» back to overview

Climate Station Data at El Libano

Dataset ID:	332
Last updated:	2011-04-06
Dataset creators:	Paul Emck Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-01-01 01:00:00 - 2003-03-30 11:00:00 - time zone: 0
Geographic coverage:	El Libano
Abstract:	Climate data measuered by automatic Thies weather ... Abstract: Climate data measuered by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site El Libano Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 5 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 5 Soil temperature in 10cm depth max = 25 Soil temperature in 10cm depth min = 10 Soil temperature in 60cm depth max = 25 Soil temperature in 60cm depth min = 10 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station LIB
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data Reserva Laipuna mountain peak

Dataset ID:	963
Last updated:	2012-09-27
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-04-16 15:00:00 - 2012-08-24 11:00:00 - time zone: -5
Geographic coverage:	Climate Station Laipuna Top / Mountain
Abstract:	--- Abstract:
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Laipuna Top Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Air temperature in 2m max = 35 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

Entity name:	Climat Station Laipuna Mountain Peak
Entity type:	dataTable
Attributes:	Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at ECSF Gegenhang

Dataset ID:	502
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2005-09-30 17:00:00 - 2011-02-23 12:00:00 - time zone: 0
Geographic coverage:	Climate Station Gegenhang
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site ECSF Gegenhang Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 25 Global Radiation max = 1600 Global Radiation max down = 250 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| land temperature \| land humidity \| precipitation \| temperature \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

Entity name:	Climate Station GEG
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] Global radiation (down) (gRaddown) [Watt per square meter] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

manual measurement of (fog-)precipitation; (1 m²-mesh-collector at 1 m above ground)

Dataset ID:	697
Last updated:	2009-10-22
Dataset creators:	Ruetger Rollenbeck
Contact:	Ruetger Rollenbeck
Temporal coverage:	2002-06-30 00:00:00 - 2008-02-29 00:00:00 - time zone: -5
Geographic coverage:	Plataforma
Abstract:	manual measurement of (fog-)precipitation; (1 m²-m... Abstract: manual measurement of (fog-)precipitation; (1 m²-mesh-collector at 1 m above ground) In the database-tables, fog-precipitation is labelled as NP, precipitation as LLP.
Additional info:	--- Additional info:
Keywords:	\| precipitation \| fog precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	fog precipitaion
Entity type:	dataTable
Attributes:	precipitation 1m (LLP) [Unitless] Fog precipitation (NP) [Unitless] Date and Time (datetime) (Unitless)

» back to overview

manual measurement of fog and precipitation

Dataset ID:	345
Last updated:	2008-11-20
Dataset creators:	Ruetger Rollenbeck
Contact:	Ruetger Rollenbeck
Temporal coverage:	2002-06-30 00:00:00 - 2008-02-29 00:00:00 - time zone: -5
Geographic coverage:	Plataforma
Abstract:	manual measurement of fog & precipitation; (1 m²-m... Abstract: manual measurement of fog & precipitation; (1 m²-mesh-collector at 1 m above ground)
Additional info:	--- Additional info:
Keywords:	\| precipitation \| fog precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	fog & precipitation
Entity type:	dataTable
Attributes:	precipitation 1m (LLP) [Unitless] Fog precipitation (NP) [Unitless] Date and Time (datetime) (Unitless) Fog precipitation (NP) [Unitless]

» back to overview

Climate Station Data at Bombuscaro

Dataset ID:	501
Last updated:	2012-09-28
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-04-10 17:00:00 - 2012-03-24 10:00:00 - time zone: 0
Geographic coverage:	Bombuscaro
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Bombuscaro Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Globar Radiation max Down = 250 Soil temperature in 10cm depth max = 40 Soil temperature in 10cm depth min = 15 Soil temperature in 60cm depth max = 25 Soil temperature in 60cm depth min = 15 Air temperature in 2m max = 35 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| photosynthetic active radiation \| global radiation \| wind speed \| land temperature \| land humidity \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station BOM
Entity type:	dataTable
Attributes:	Global radiation (down) (gRaddown) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Vilcabamba

Dataset ID:	340
Last updated:	2011-01-25
Dataset creators:	Paul Emck Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-02-19 01:00:00 - 2003-03-25 16:00:00 - time zone: 0
Geographic coverage:	Vilcabamba
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Vilcabamba Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 5 Soil temperature in 10cm depth max = 35 Soil temperature in 10cm depth min = 10 Soil temperature in 60cm depth max = 25 Soil temperature in 60cm depth min = 10 Air temperature in 2m max = 35 Air temperature in 2m min = 10 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station VIL
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Paramo

Dataset ID:	334
Last updated:	2012-02-22
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-01-01 01:00:00 - 2011-02-27 10:00:00 - time zone: 0
Geographic coverage:	Cajanuma Paramo
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Cajanuma Páramo Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 26 Global Radiation max = 1400 Soil temperature in 0cm depth max = 35 Soil temperature in 0cm depth min = 0 Soil temperature in 10cm depth max = 23 Soil temperature in 10cm depth min = 3 Soil temperature in 60cm depth max = 15 Soil temperature in 60cm depth min = 5 Air temperature in 2m max = 20 Air temperature in 2m min = 0 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station PAR
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Tapichalaca

Dataset ID:	335
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2003-08-19 19:00:00 - 2007-06-18 11:00:00 - time zone: 0
Geographic coverage:	Tapichalaca
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Tapichalaca Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| relative humidity \| wind speed \| precipitation \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station TAP
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data Pasto Abraham

Dataset ID:	970
Last updated:	2012-09-28
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-10-24 13:00:00 - 2012-08-15 10:00:00 - time zone: -5
Geographic coverage:	Climate Station Pasto Abraham
Abstract:	Cliamate Data Meassurements Pasto Abraham... Abstract: Cliamate Data Meassurements Pasto Abraham
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Pasto Abraham Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Air temperature in 2m max = 30 Air temperature in 2m min = 10 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| relative humidity \| precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station Abraham
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) precipitation (PCP) [Millimeter] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent]

» back to overview

Climate Station Data ECSF established 2010

Dataset ID:	1202
Last updated:	2012-09-25
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2010-06-21 19:00:00 - 2012-08-14 15:00:00 - time zone: -5
Geographic coverage:	ECSF climate station
Abstract:	Due to technical problems the former weather stati... Abstract: Due to technical problems the former weather station ECSF (established 1998) was shut down in 2010. At the same time a new weather station called "Climate Station ECSF established 2010" was installed 3m beside the former ECSF weather station on the same measuring plot.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site ECSF Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 25 Global Radiation max = 1400 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 99.9 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| wind direction \| long term monitoring \| TMean \| ECSF \| data logger \| automatic weather station \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	ECSF established 2010
Entity type:	dataTable
Attributes:	Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Irradiation (Irradiation) [Watt per square meter] precipitation (PCP) [Millimeter] Date and Time (datetime) (Unitless)

» back to overview

automatic measurement of visibility/precipitation/particle-count/temperature/brightness/3 x atmospheric extinction-coefficients/pH of precipitation/electric conductivity of precipitation; Scatteromete

Dataset ID:	709
Last updated:	2011-03-23
Dataset creators:	Ruetger Rollenbeck
Contact:	Ruetger Rollenbeck
Temporal coverage:	2002-01-01 00:00:00 - 2008-12-31 23:00:00 - time zone: 0
Geographic coverage:	ECSF climate station
Abstract:	automatic measurement of visibility/precipitation/... Abstract: automatic measurement of visibility/precipitation/particle-count/temperature/brightness/3 x atmospheric extinction-coefficients/pH of precipitation/electric conductivity of precipitation; Scatterometer electro-optical sensor
Additional info:	Dies dient der Dokumentation... und wurde dem Dat... Additional info: Dies dient der Dokumentation... und wurde dem Datensatz kurz vor dem löschen hinzugefügt. So, wir haben uns nun geeinigt die Datensätze 353 und 709 zu löschen und Rütger legt den Datensatz komplett neu an (im Januar 2011). Bis dahin sind die Daten nicht verfügbar. Fehlerhaft in den Daten ist zum einen die Version 353_1 (als der erste Upload von PCP). Da sind in Rütgers DB bereits falsche Tageswerte gerechnet worden. In 353_2 sind die korrigierten Tagessätze, aber teilweise 0 statt NULL eingetragen. Alle Daten sind fälschlicherweise ohne Quality Flag hchgeladen worden. Die Daten in dem Attribut Ta_8m sollten eigentlich in dem Attribut Ta_2m sein. Die Datensätze sind nach dem Löschen nicht mehr in der DB enthalten, sondern nur noch im Archiv (von gelöschten Datensätzen) verfügbar. Außerdem werden die Datensätze 352 und 708 ebenfalls gelöscht. Sie enthalten keine Quality Flags und Rütger meint der Datensatz ist inhaltlich nicht brauchbar.
Keywords:	\| visibility \| precipitation \| particle-count \| temperature \| atmospheric extinktion \| brightness \| pH of precipitation \| electric conductivity of precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Scatterometer
Entity type:	dataTable
Attributes:	Coefficient of backscattering (backexco) [Unitless] Background illumination (bgill) [Unitless] Extinction coefficient (excop) [Unitless] Total extinction (excotot) [Unitless] Conductivity (lf) [Microsiemens per centimeter] pH-value (ph) [Unitless] Particle counting (pn) [Count] precipitation (PCP) [Millimeter] Visibility (visscatt) [Kilometer] Air temperature in 8m (Ta_8m) [Degrees Celsius] Date and Time (datetime) (Unitless)

» back to overview

Environmental changes in biodiversity hotspot ecosystems of South Ecuador: RESPonse and feedback effECTs (FOR2730)

Platform data

Overview

Detailed view

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Download

Please accept the following data user agreement for external data users:

Data Services

Quick search

Keywords:

Latest datasets

Latest publications

Environmental changes in biodiversity hotspot ecosystems of
South Ecuador: RESPonse and feedback effECTs (FOR2730)