Dataset ID:	339
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1999-05-16 10:00:00 - 2011-02-20 12:00:00 - time zone: 0
Geographic coverage:	TS 1
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site TS1 Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 15 Rad Max = 1300 tsoil0cm max = 30 tsoil0cm min = 6 tsoil10cm max = 23 tsoil10cm min = 7 Tsoil60cm max = 17 tsoil60ccm min = 10 Air temperature in 2m max = 26 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station TS1
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

El Tiro climate station quality controlled

Dataset ID:	1401
Last updated:	2015-06-09
Dataset creators:	Ruetger Rollenbeck Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters Ruetger Rollenbeck
Temporal coverage:	1998-02-12 15:00:00 - 2015-01-18 15:00:00 - time zone: -5
Geographic coverage:	El Tiro - Climate station
Abstract:	Quality controls applied to the hourly time series... Abstract: Quality controls applied to the hourly time series of the El-Tiro-climate stations. Temeprature and wind direction had to be adjusted for apparent deviations. for details review the file qualityassessment.pdf supplied with the ECSF best estimate data set
Additional info:	--- Additional info:
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| wind direction \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	Climate data El Tiro
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] Irradiation (Irradiation) [Watt per square meter] Emission of radiance (Emission) [Watt per square meter]

» back to overview

manual measurement of fog and precipitation

Dataset ID:	349
Last updated:	2008-11-20
Dataset creators:	Ruetger Rollenbeck
Contact:	Ruetger Rollenbeck
Temporal coverage:	2002-04-30 00:00:00 - 2008-02-29 00:00:00 - time zone: -5
Geographic coverage:	Toms Hut
Abstract:	manual measurement of fog & precipitation; (1 m²-m... Abstract: manual measurement of fog & precipitation; (1 m²-mesh-collector at 1 m above ground)
Additional info:	--- Additional info:
Keywords:	\| precipitation \| fog precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	fog & precipitation
Entity type:	dataTable
Attributes:	precipitation 1m (LLP) [Unitless] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data Antenas Top

Dataset ID:	969
Last updated:	2012-09-28
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2010-05-29 17:00:00 - 2012-08-16 13:00:00 - time zone: -5
Geographic coverage:	Climate Station Antenas Top
Abstract:	Climate Station installed on 29.05.2010 Attenti... Abstract: Climate Station installed on 29.05.2010 Attention! Cooordinates and altitude determined by DGM, field validation is missing!
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Antenas Top Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 30 Global Radiation max = 1400 Soil temperature in 10cm depth max = 16 Soil temperature in 10cm depth min = 5 Soil temperature in 60cm depth max = 12 Soil temperature in 60cm depth min = 4 Air temperature in 2m max = 22 Air temperature in 2m min = 1 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station Ant Top
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] Global radiation (2m) (gRad1) [Watt per square meter] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] Soil Temperature at 50 cm (temp_soil_50cm) [Degrees Celsius]

» back to overview

Climate Station Data Reserva Laipuna mountain peak

Dataset ID:	963
Last updated:	2012-09-27
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-04-16 15:00:00 - 2012-08-24 11:00:00 - time zone: -5
Geographic coverage:	Climate Station Laipuna Top / Mountain
Abstract:	--- Abstract:
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Laipuna Top Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Air temperature in 2m max = 35 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \|
Intellectual rights:	FOR816 data user agreement

Entity name:	Climat Station Laipuna Mountain Peak
Entity type:	dataTable
Attributes:	Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data ECSF established 2010

Dataset ID:	1202
Last updated:	2012-09-25
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2010-06-21 19:00:00 - 2012-08-14 15:00:00 - time zone: -5
Geographic coverage:	ECSF climate station
Abstract:	Due to technical problems the former weather stati... Abstract: Due to technical problems the former weather station ECSF (established 1998) was shut down in 2010. At the same time a new weather station called "Climate Station ECSF established 2010" was installed 3m beside the former ECSF weather station on the same measuring plot.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site ECSF Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 25 Global Radiation max = 1400 Air temperature in 2m max = 30 Air temperature in 2m min = 5 Air humidity max = 99.9 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 25 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| climate \| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| wind direction \| long term monitoring \| TMean \| ECSF \| data logger \| automatic weather station \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	ECSF established 2010
Entity type:	dataTable
Attributes:	Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] air temperature in 2m (Ta_2m) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Irradiation (Irradiation) [Watt per square meter] precipitation (PCP) [Millimeter] Date and Time (datetime) (Unitless)

» back to overview

Hourly precipitation data at the FN2 site (ECSF area, Camino Canal / Zig-Zag) between 2011-2016

Dataset ID:	1672
Last updated:	2017-10-02
Dataset creators:	Andre Velescu
Contact:	Wolfgang Wilcke Andre Velescu
Temporal coverage:	2011-10-26 10:00:00 - 2016-05-14 00:00:00 - time zone: -5
Geographic coverage:	FN2 rainfall station Camino Canal / Zig-Zag
Abstract:	Rainfall data from the ECSF area in hourly resolut... Abstract: Rainfall data from the ECSF area in hourly resolution at the FN2 site located at the intersection of Camino Canal and Camino Zig-Zag. Rainfall was measured with an automatic rain gauge (Campbell ARG100, Palo Alto, USA) coupled with a HOBO H07-002-04 datalogger (Onset, Bourne, USA). Event-based recordings were aggregated to hourly data. Rain events occuring during one hour interval were aggregated to the next full hour. Data values are complete unless otherwise indicated by the data gaps below: Data gaps during the observation period: 03/05/2012 19:02:20.5 to 17/05/2012 15:28:52.0 20/12/2013 10:36:58.5 to 08/01/2014 15:51:25.0 28/07/2014 15:57:55.0 to 01/09/2014 17:14:27.0 06/10/2014 14:48:25.0 to 15/10/2014 18:09:26.0 Data gaps during the observation period are indicated by values = NULL. Please take these data gaps into account when aggregating precipitation values.
Additional info:	--- Additional info:
Keywords:	\| precipitation \| ECSF \| rainfall \| climate data \| time series \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	fn2_precipitation_hourly_v1
Entity info:	Precipitation data ECSF rainfall totalizer FN2 2011-2016
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) precipitation (PCP) [Millimeter]

» back to overview

Climate Station Data at Paramo

Dataset ID:	334
Last updated:	2012-02-22
Dataset creators:	Thorsten Peters Paul Emck Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-01-01 01:00:00 - 2011-02-27 10:00:00 - time zone: 0
Geographic coverage:	Cajanuma Paramo
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Cajanuma Páramo Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 26 Global Radiation max = 1400 Soil temperature in 0cm depth max = 35 Soil temperature in 0cm depth min = 0 Soil temperature in 10cm depth max = 23 Soil temperature in 10cm depth min = 3 Soil temperature in 60cm depth max = 15 Soil temperature in 60cm depth min = 5 Air temperature in 2m max = 20 Air temperature in 2m min = 0 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 35 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station PAR
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Bombuscaro

Dataset ID:	501
Last updated:	2012-09-28
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2007-04-10 17:00:00 - 2012-03-24 10:00:00 - time zone: 0
Geographic coverage:	Bombuscaro
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Bombuscaro Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Globar Radiation max Down = 250 Soil temperature in 10cm depth max = 40 Soil temperature in 10cm depth min = 15 Soil temperature in 60cm depth max = 25 Soil temperature in 60cm depth min = 15 Air temperature in 2m max = 35 Air temperature in 2m min = 5 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Relative air humidity values are corrected by a standarized method and quality flag is set to "m = manually corrected". 6. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| photosynthetic active radiation \| global radiation \| wind speed \| land temperature \| land humidity \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station BOM
Entity type:	dataTable
Attributes:	Global radiation (down) (gRaddown) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Global radiation (2m) (gRad1) [Watt per square meter] Date and Time (datetime) (Unitless)

» back to overview

manual measurement of (fog-)precipitation; (1 m²-mesh-collector at 1 m above ground)

Dataset ID:	696
Last updated:	2010-11-28
Dataset creators:	Ruetger Rollenbeck
Contact:	Ruetger Rollenbeck
Temporal coverage:	2002-02-28 00:00:00 - 2008-02-29 00:00:00 - time zone: -5
Geographic coverage:	ECSF climate station
Abstract:	manual measurement of (fog-)precipitation; (1 m²-m... Abstract: manual measurement of (fog-)precipitation; (1 m²-mesh-collector at 1 m above ground) In the database-table, the fog-precipitation measuring is labelled as NP, precipitation measuring as LLP
Additional info:	--- Additional info:
Keywords:	\| precipitation \| fog precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	fog & precipitation
Entity type:	dataTable
Attributes:	precipitation 1m (LLP) [Unitless] Fog precipitation (NP) [Unitless] Date and Time (datetime) (Unitless)

» back to overview

Rainfall-chemistry Q2

Dataset ID:	405
Last updated:	2009-03-11
Dataset creators:	Wolfgang Wilcke Thorsten Pohlert
Contact:	Thorsten Pohlert Wolfgang Wilcke Hans Wullaert
Temporal coverage:	1998-04-24 00:00:00 - 2003-04-30 00:00:00 - time zone: -5
Geographic coverage:	Q2 EZG
Abstract:	From Boy et al. 2008: Abstract: We explored the... Abstract: From Boy et al. 2008: Abstract: We explored the influence of biomass burning in Amazonia and northeastern Latin America on N, C, P, S, K, Ca, Mg, Al, Mn, and Zn cycles of an Andean montane forest in south Ecuador exposed to the Amazon basin between May 1998 and April 2003. We assessed the response of the element budget of three microcatchments (8 - 13 ha) to the variations in atmospheric deposition between the intensive burning season and outside the burning season in Amazonia. There were significantly elevated H, N, and Mn depositions during biomass burning. Elevated H deposition during biomass burning caused elevated base metal loss from the canopy and the organic horizon and deteriorated already low base metal supply of the vegetation. N was only retained during biomass burning but not during nonfire conditions when deposition was much smaller. We conclude that biomass burning-related aerosol emissions in Amazonia are large enough to substantially increase element deposition at the western rim of Amazonia. Particularly the related increase of acid deposition impoverishes already base metal scarce ecosystems. As biomass burning is most intense during El Nino situations, a shortened El Nino - Southern Oscillation cycle because of global warming likely enhances the acid deposition at our study forest.
Additional info:	--- Additional info:
Keywords:	\| precipitation \| rainwater chemistry \| wet deposition \| metal deposition \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Q2pcp-chem
Entity type:	dataTable
Attributes:	Calcium measured in precipitation (Caw_pcp) [Milligram per liter] Magnesium measured in precipitation (Mgw_pcp) [Milligram per liter] Sodium measured in precipitation (Naw_pcp) [Milligram per liter] Potassium measured in precipitation (Kw_pcp) [Milligram per liter] Dissolved organic carbon measured in precipitation (DOCw_pcp) [Milligram per liter] Ortho-phosphate (reactive phosphorus) measured in precipitation (PO4w_pcp) [Milligram of phosphorus per liter] Total phosphorus measured in precipitation (Ptotw_pcp) [Milligram of phosphorus per liter] Chloride measured in precipitation (Clw_pcp) [Milligram per liter] Ammonium measured in precipitation (NH4w_pcp) [Milligram of nitrogen per liter] Nitrate measured in precipitation (NO3w_pcp) [Milligram of nitrogen per liter] Total nitrogen measured in precipitation (Ntotw_pcp) [Milligram of nitrogen per liter] Date and Time (datetime) (Unitless)

» back to overview

Climate Station Data at Vilcabamba

Dataset ID:	340
Last updated:	2011-01-25
Dataset creators:	Paul Emck Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	1998-02-19 01:00:00 - 2003-03-25 16:00:00 - time zone: 0
Geographic coverage:	Vilcabamba
Abstract:	Climate data measured by automatic Thies weather s... Abstract: Climate data measured by automatic Thies weather station of the working group B2.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for site Vilcabamba Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed max = 10 Global Radiation max = 1400 Soil temperature in 0cm depth max = 45 Soil temperature in 0cm depth min = 5 Soil temperature in 10cm depth max = 35 Soil temperature in 10cm depth min = 10 Soil temperature in 60cm depth max = 25 Soil temperature in 60cm depth min = 10 Air temperature in 2m max = 35 Air temperature in 2m min = 10 Air humidity max = 100 Air humidity min = 10 3. Checking the plausibility of air temperature and air humidity within the measurement intervals by comparing the previous and current values. If the temperature amplitude is higher then 10°C and humidity amplitude is higher than 30% the plausibility of this variation is checked by comparing to the variation of the other parameter. The quality flag is set to "e = variation implausible". 4. Precipitation check If precipitation is more than 40 mm then quality flag is set to "c = out of range" If precipitation is more than 15 mm and air temperature increases more than 0.2 °C inbetween a temporal interval then quality flag is set to "e = variation impossible". 5. Wind direction is not quality checked and flag is set to "nqc = not quality checked" All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station VIL
Entity type:	dataTable
Attributes:	Global radiation (2m) (gRad1) [Watt per square meter] precipitation (PCP) [Millimeter] Air humidity 2m (Huma_2m) [Percent] air temperature in 2m (Ta_2m) [Degrees Celsius] soil temperature in 0cm (Ts_0cm) [Degrees Celsius] soil temperature in 10cm (Ts_10cm) [Degrees Celsius] soil temperature in 60cm (Ts_60cm) [Degrees Celsius] Wind direction 3m (Wind_direction) [Degree] Wind speed (Windspeed) [Meter per second] Date and Time (datetime) (Unitless)

» back to overview

Weekly precipitation, electrical conductivity and pH at the FN2 site (ECSF area, Camino Canal / Zig-Zag) between 1998-2016

Dataset ID:	1673
Last updated:	2017-10-02
Dataset creators:	Andre Velescu Wolfgang Wilcke
Contact:	Wolfgang Wilcke Andre Velescu
Temporal coverage:	1998-03-20 00:00:00 - 2016-12-28 00:00:00 - time zone: -5
Geographic coverage:	FN2 rainfall station Camino Canal / Zig-Zag
Abstract:	Weekly time series of precipitation data from the ... Abstract: Weekly time series of precipitation data from the ECSF area at the measuring station FN2 located at the intersection of Camino Canal and Camino Zig-Zag. Precipitation was measured with 5 Hellmann-type pluviometers. The resulting weekly replicates of precipitation were volume-weighted and bulked to one sample per collecting interval. Electrical conductivity and pH values were measured immediately in unfiltered aliquots in the laboratory at the ECSF.
Additional info:	--- Additional info:
Keywords:	\| precipitation \| electric conductivity \| ECSF \| pH values \| time series \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	fn2_precipitation_water_fluxes_ph_ec_v1
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) precipitation (PCP) [Millimeter] Electrical conductivity measured in precipitation (ECw_pcp) [Microsiemens per centimeter] PH measured in precipitation (PHw_pcp) [Unitless]

» back to overview

pH- and EC-Measurements in incident precipitation - Q2

Dataset ID:	414
Last updated:	2009-03-11
Dataset creators:	Wolfgang Wilcke Thorsten Pohlert
Contact:	Thorsten Pohlert Wolfgang Wilcke Hans Wullaert
Temporal coverage:	1998-04-24 00:00:00 - 2008-07-05 00:00:00 - time zone: -5
Geographic coverage:	Q2 EZG
Abstract:	Long term series of weekly total of incident prici... Abstract: Long term series of weekly total of incident pricipitation (mean of 5 replicates), pH and EC of bulked PCP samples. NOTE: PCP volumes from > April 2003 need to be quality checked (rate 50 to 20). Taken from Fleischbein et al. (2005): Rainfall interception in forests is influenced by properties of the canopy that tend to vary over small distances. Our objectives were: (i) to determine the variables needed to model the interception loss of the canopy of a lower montane forest in south Ecuador, i.e. the storage capacity of the leaves S and of the trunks and branches S-t, and the fractions of direct throughfall p and stemflow p(t); (ii) to assess the influence of canopy density and epiphyte coverage of trees on the interception of rainfall and subsequent evaporation losses. The study site was located on the eastern slope of the eastern cordillera in the south Ecuadorian Andes at 1900-2000 m above sea level. We monitored incident rainfall, throughfall, and stemflow between April 1998 and April 2001. In 2001, the leaf area index (LAI), inferred from light transmission, and epiphyte coverage was determined. The mean annual incident rainfall at three gauging stations ranged between 2319 and 2561 mm. The mean annual interception loss at five study transects in the forest varied between 591 and 1321 mm, i.e. between 25 and 52% of the incident rainfall. Mean S was estimated at 1(.)91 mm for relatively dry weeks with a regression model and at 2(.)46 mm for all weeks with the analytical Gash model; the respective estimates of mean S-t were 0(.)04 mm and 0(.)09 mm, of mean p were 0(.)42 and 0(.)63, and of mean pt were 0(.)003 and 0(.)012. The LAI ranged from 5(.)19 to 9(.)32. Epiphytes, mostly bryophytes, covered up to 80% of the trunk and branch surfaces. The fraction of direct throughfall p and the LAI correlated significantly with interception loss (Pearson's correlation coefficient r = -0(.)77 and 0(.)35 respectively, n = 40). Bryophyte and lichen coverage tended to decrease S, and vascular epiphytes tended to increase it, although there was no significant correlation between epiphyte coverage and interception loss. Our results demonstrate that canopy density influences interception loss but only explains part of the total variation in interception loss. Copyright (c) 2004 John Wiley & Sons, Ltd.
Additional info:	Long term series of weekly total of incident prici... Additional info: Long term series of weekly total of incident pricipitation (mean of 5 replicates), pH and EC of bulked PCP samples. NOTE: PCP volumes from > April 2003 need to be quality checked (rate 50 to 20).
Keywords:	\| precipitation \| rainwater chemistry \| wet deposition \| water quality \| hydrochemistry \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Q2pcp-pH-EC
Entity type:	dataTable
Attributes:	precipitation (PCP) [Millimeter] PH measured in precipitation (PHw_pcp) [Unitless] Electrical conductivity measured in precipitation (ECw_pcp) [Microsiemens per centimeter] Date and Time (datetime) (Unitless)

» back to overview

Weekly precipitation, electrical conductivity and pH at the FN3 site (T2 / ECSF climate station) between 2000-2016

Dataset ID:	1675
Last updated:	2017-10-02
Dataset creators:	Andre Velescu Wolfgang Wilcke
Contact:	Wolfgang Wilcke Andre Velescu
Temporal coverage:	2000-05-10 00:00:00 - 2016-12-28 00:00:00 - time zone: -5
Geographic coverage:	ECSF climate station
Abstract:	Weekly time series of precipitation data from the ... Abstract: Weekly time series of precipitation data from the ECSF area at the measuring station FN3 located on T2 near the ECSF meteorological station. Precipitation was measured with 5 Hellmann-type pluviometers. The resulting weekly replicates of precipitation were volume-weighted and bulked to one sample per collecting interval. Electrical conductivity and pH values were measured immediately in unfiltered aliquots in the laboratory at the ECSF.
Additional info:	--- Additional info:
Keywords:	\| precipitation \| electric conductivity \| ECSF \| pH values \| time series \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	fn3_precipitation_water_fluxes_ph_ec_v1
Entity info:	Weekly precipitation, EC and pH at FN3 2000-2016
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) precipitation (PCP) [Millimeter] Electrical conductivity measured in precipitation (ECw_pcp) [Microsiemens per centimeter] PH measured in precipitation (PHw_pcp) [Unitless]

» back to overview

manual measurement of fog and precipitation

Dataset ID:	350
Last updated:	2010-11-29
Dataset creators:	Ruetger Rollenbeck
Contact:	Ruetger Rollenbeck
Temporal coverage:	2002-02-28 00:00:00 - 2008-02-29 00:00:00 - time zone: -5
Geographic coverage:	TS 1
Abstract:	manual measurement of fog & precipitation; (1 m²-m... Abstract: manual measurement of fog & precipitation; (1 m²-mesh-collector at 1 m above ground)
Additional info:	--- Additional info:
Keywords:	\| precipitation \| fog precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	fog & precipitation
Entity type:	dataTable
Attributes:	precipitation 1m (LLP) [Unitless] Fog precipitation (NP) [Unitless] Date and Time (datetime) (Unitless)

» back to overview

manual measurement of fog and precipitation

Dataset ID:	345
Last updated:	2008-11-20
Dataset creators:	Ruetger Rollenbeck
Contact:	Ruetger Rollenbeck
Temporal coverage:	2002-06-30 00:00:00 - 2008-02-29 00:00:00 - time zone: -5
Geographic coverage:	Plataforma
Abstract:	manual measurement of fog & precipitation; (1 m²-m... Abstract: manual measurement of fog & precipitation; (1 m²-mesh-collector at 1 m above ground)
Additional info:	--- Additional info:
Keywords:	\| precipitation \| fog precipitation \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	fog & precipitation
Entity type:	dataTable
Attributes:	precipitation 1m (LLP) [Unitless] Fog precipitation (NP) [Unitless] Date and Time (datetime) (Unitless) Fog precipitation (NP) [Unitless]

» back to overview

Weekly element concentrations in precipitation at the FN2 site (ECSF area, Camino Canal / Zig-Zag) between 1998-2013

Dataset ID:	1674
Last updated:	2017-09-27
Dataset creators:	Andre Velescu Wolfgang Wilcke
Contact:	Wolfgang Wilcke Andre Velescu
Temporal coverage:	1998-03-20 00:00:00 - 2013-05-01 00:00:00 - time zone: -5
Geographic coverage:	FN2 rainfall station Camino Canal / Zig-Zag
Abstract:	Weekly time series of measured concentrations of A... Abstract: Weekly time series of measured concentrations of Al, Mn, Zn, Cl, PO4-P, Total P, NH4-N, NO3-N, Total N, K, Na, Mg, Ca and Total organic C in precipitation in the ECSF area at the FN2 site (Camino Canal / Zig-Zag). The weekly time series extends between April 1998 and May 2013. Precipitation was sampled with 5 Hellmann-type collectors. Replicates were collected, volume-weighted and bulked to one sample per plot. Samples were immediately filtered (4-7 µm) in the laboratory of the ECSF and stored at -20 °C until transport in frozen state to Germany or to Switzerland for concentration measurements.
Additional info:	--- Additional info:
Keywords:	\| precipitation \| nitrate \| ammonium \| chloride \| calcium \| potassium \| magnesium \| sodium \| aluminium \| manganese \| zinc \| element concentrations \| total nitrogen \| phosphate \| total phosphorus \| total organic carbon \| time series \|
Intellectual rights:	PAK 823-825 data user agreement. (www.tropicalmountainforest.org/dataagreementp3.do)

view/filter values

Entity name:	fn2_precipitation_chemistry_v1
Entity info:	Weekly precipitation chemistry FN2 1998-2013
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) Aluminium measured in precipitation (Alw_pcp) [Milligram per liter] Manganese measured in precipitation (Mnw_pcp) [Milligram per liter] Zinc measured in precipitation (Znw_pcp) [Milligram per liter] Calcium measured in precipitation (Caw_pcp) [Milligram per liter] Potassium measured in precipitation (Kw_pcp) [Milligram per liter] Magnesium measured in precipitation (Mgw_pcp) [Milligram per liter] Sodium measured in precipitation (Naw_pcp) [Milligram per liter] Ammonium measured in precipitation (NH4w_pcp) [Milligram of nitrogen per liter] Nitrate measured in precipitation (NO3w_pcp) [Milligram of nitrogen per liter] Total nitrogen measured in precipitation (Ntotw_pcp) [Milligram of nitrogen per liter] Total sulphur measured in precipitation (Stotw_pcp) [Milligram per liter] Chloride measured in precipitation (Clw_pcp) [Milligram per liter] Dissolved organic carbon measured in precipitation (DOCw_pcp) [Milligram per liter] Ortho-phosphate (reactive phosphorus) measured in precipitation (PO4w_pcp) [Milligram of phosphorus per liter] Total phosphorus measured in precipitation (Ptotw_pcp) [Milligram of phosphorus per liter]

» back to overview

Climate Station Data at Cajanuma Forest

Dataset ID:	330
Last updated:	2011-04-06
Dataset creators:	Thorsten Peters Michael Richter
Contact:	Thorsten Peters
Temporal coverage:	2003-03-29 13:00:00 - 2007-04-24 10:00:00 - time zone: 0
Geographic coverage:	Cajanuma Wald
Abstract:	Climate data measuered by automatic Thies weather ... Abstract: Climate data measuered by automatic Thies weather station of the working group B2. Windspeed and winddirection were measured 1m above and 1m below forest canopy.
Additional info:	The data are quality checked by a standardised met... Additional info: The data are quality checked by a standardised method. Climate Parameter Quality Check for Cajanuma Forest Checking modules: 1. Does a value exist? Quality flag is set to "d = missing" 2. Checking of site specific threshold value. If the value is not inbetween the thresholds the quality flag is set to "c = out of range": Windspeed 8m max = 15 windspeed 2m max = 4 Rad Max = 500 graddown max = 50 Air temperature in 2m max = 20 Air temperature in 2m min = 0 Air temperature in 30cm max = 20 Air temperature in 30cm min = 0 Air humidity in 2m max = 100 Air humidity in 2m min = 10 Air humidity in 30cm max = 100 Air humidity in 30cm min = 10 3. Wind direction and soil moistures are not quality checked and flag is set to "nqc = not quality checked" 4. Soil moisture is not quality checked All other values are set to "a = valid".
Keywords:	\| air temperature \| relative humidity \| global radiation \| wind speed \| precipitation \| temperature \| humidity \| wind direction \| soil temperature \|
Intellectual rights:	FOR816 data user agreement

view/filter values

Entity name:	Climate Station WAL
Entity type:	dataTable
Attributes:	Date and Time (datetime) (Unitless) air temperature in 2m (Ta_2m) [Degrees Celsius] air temperature in 30cm (Ta_30cm) [Degrees Celsius] Air humidity 2m (Huma_2m) [Percent] Air humidity 30cm (Huma_30cm) [Percent] Global radiation (gRad2) [Watt per square meter] Global radiation (down) (gRaddown) [Watt per square meter] wind speed 8m (Windspeed_8m) [Meter per second] Wind direction 8m (Wind_direction_8m) [Degree] Wind speed (Windspeed) [Meter per second] Wind direction 3m (Wind_direction) [Degree] Soil moisture 10cm Forest vegetation (Soil_moisture_10cm_forest) [Volume percent] Soil moisture 50cm Forest vegetation (Soil_moisture_50cm_forest) [Volume percent] Soil moisture 10cm Bamboo vegetation (Soil_moisture_10cm_bamboo) [Volume percent]

» back to overview

Environmental changes in biodiversity hotspot ecosystems of South Ecuador: RESPonse and feedback effECTs (FOR2730)

Platform data

Overview

Detailed view

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Abstract:

Additional info:

Download

Please accept the following data user agreement for external data users:

Data Services

Quick search

Keywords:

Latest datasets

Latest publications

Environmental changes in biodiversity hotspot ecosystems of
South Ecuador: RESPonse and feedback effECTs (FOR2730)